View UPA1815GR-9JG-E1_543647.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
PA1815
P-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR SWITCHING
DESCRIPTION
The PA1815 is a switching device which can be driven directly by a 2.5-V power source. The PA1815 features a low on-state resistance and excellent switching characteristics, and is suitable for applications such as power switch of portable machine and so on.
8
PACKAGE DRAWING (Unit : mm)
5 1, 5, 8 : Drain 2, 3, 6, 7: Source 4 : Gate
1.2 MAX. 1.00.05 0.25 3 +5 -3 0.10.05 0.5 0.6 +0.15 -0.1
FEATURES
* Can be driven by a 2.5-V power source * Low on-state resistance RDS(on)1 = 15 m MAX. (VGS = -4.5 V, ID = -3.5 A) RDS(on)2 = 16 m MAX. (VGS = -4.0 V, ID = -3.5 A) RDS(on)3 = 19 m MAX. (VGS = -3.3 V, ID = -3.5 A) RDS(on)4 = 23 m MAX. (VGS = -2.5 V, ID = -3.5 A)
1 4
0.145 0.055
3.15 0.15 3.0 0.1
6.4 0.2 4.4 0.1 1.0 0.2
ORDERING INFORMATION
PART NUMBER PACKAGE Power TSSOP8
0.65 0.27 +0.03 -0.08 0.8 MAX.
0.1
PA1815GR-9JG
0.10 M
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Drain to Source Voltage Gate to Source Voltage Drain Current (DC) Drain Current (pulse)
Note1 Note2
EQUIVALENT CIRCUIT
-20 12 7 26 2.0 150 -55 to +150 V V A A W C C
Gate Protection Diode Source Gate Drain
VDSS VGSS ID(DC) ID(pulse) PT Tch Tstg
Body Diode
Total Power Dissipation Channel Temperature Storage Temperature
Notes 1. PW 10 s, Duty Cycle 1 % 2 2. Mounted on ceramic substrate of 5000 mm x 1.1 mm Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D13805EJ3V0DS00 (3rd edition) Date Published May 2001 NS CP(K) Printed in Japan
The mark 5 shows major revised points.
(c)
1998, 1999
PA1815
ELECTRICAL CHARACTERISTICS (TA = 25 C)
CHARACTERISTICS Zero Gate Voltage Drain Current Gate Leakage Current Gate to Source Cut-off Voltage Forward Transfer Admittance Drain to Source On-state Resistance SYMBOL IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 RDS(on)3 RDS(on)4 Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr TEST CONDITIONS VDS = -20 V, VGS = 0 V VGS = 12 V, VDS = 0 V VDS = -10 V, ID = -1 mA VDS = -10 V, ID = -3.5 A VGS = -4.5 V, ID = -3.5 A VGS = -4.0 V, ID = -3.5 A VGS = -3.3 V, ID = -3.5 A VGS = -2.5 V, ID = -3.5 A VDS = -10 V VGS = 0 V f = 1 MHz VDD = -10 V ID = -3.5 A VGS(on) = -4.0 V RG = 10 VDD = -16 V ID = -7 A VGS = -4.0 V IF = 7 A, VGS = 0 V IF = 7 A, VGS = 0 V di/dt = 100 A/s -0.5 9 -0.9 19 12 13 14 17 3000 790 410 45 200 140 160 25 5 8.5 0.78 60 45 15 16 19 23 MIN. TYP. MAX. -10 10 -1.5 UNIT
A A
V S m m m m pF pF pF ns ns ns ns nC nC nC V ns nC
TEST CIRCUIT 1 SWITCHING TIME
D.U.T. RL PG. RG RG = 10 VDD
ID 90 % 90 % ID 0 10 % td(on) ton tr td(off) toff 10 % tf VGS
TEST CIRCUIT 2 GATE CHARGE
D.U.T. IG = 2 mA
VGS(on) 90 %
VGS
Wave Form
RL VDD
0
10 %
PG.
50
VGS 0 = 1 s Duty Cycle 1 %
ID
Wave Form
2
Data Sheet D13805EJ3V0DS
PA1815
TYPICAL CHARACTERISTICS (TA = 25 C)
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA 100
5
-100
FORWARD BIAS SAFE OPERATING AREA
d ite V) Lim 4.5 =
ID(pulse)
10
dT - Derating Factor - %
80
ID - Drain Current - A
-10
RV (@
) (on DS GS
PW
ms
=1
ID(DC)
ms
60
10 0m s
-1
DC
40
20
0
30
60
90
120
150
TA = 25 C Single Pulse Mounted on Ceramic 2 -0.01 Substrate of 50cm x 1.1mm
-0.1
-0.1
-1
-10
-100
TA - Ambient Temperature - C
VDS - Drain to Source Voltage - V
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE -30
TRANSFER CHARACTERISTICS -100 -10 VDS = -10 V
ID - Drain Current - A
ID - Drain Current - A
-20
VGS = -4.5 V -4.0 V -3.3 V -2.5 V
-1 -0.1 -0.01 -0.001
TA = 125C 75C 25C
-25C
-10
-0.0001
0 0.0
-0.2
-0.4
-0.6
-0.8
-0.00001 0
-0.5
-1.0
-1.5
-2.0
VDS - Drain to Source Voltage - V
GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE
VGS(off) - Gate to Source Cut-off Voltage - V
VGS - Gate to Sorce Voltage - V
-1.2
FORWARD TRANSFER ADMITTANCE Vs. DRAIN CURRENT 100
| yfs | - Forward Transfer Admittance - S
VDS = -10 V ID = -1 mA
VDS = -10V TA = -25 C 25 C
-1.0
-0.8
1
75 C 125 C
-0.6
-0.4 -50
0
50
100
150
Tch - Channel Temperature - C
0.01 -0.01
-0.1
-1
ID - Drain Current - A
-10
-100
Data Sheet D13805EJ3V0DS
3
PA1815
RDS(on) - Drain to Source On-State Resistance - m
30
RDS(on) - Drain to Source On-State Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT VGS = -2.5 V
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 25 VGS = -3.3 V
25
TA = 125C 75C 25C
20
TA = 125C
20
75C
15
15
25C
-25C
-25C 10 -0.01 -0.1 -1 -10 -100
10 -0.01
-0.1
-1
-10
-100
ID - Drain Current - A DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 20 VGS = -4.0 V
TA = 125C 75C 25C
ID - Drain Current - A DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 20 VGS = -4.5 V
TA = 125C
RDS(on) - Drain to Source On-State Resistance - m
15
RDS(on) - Drain to Source On-State Resistance - m
15
75C 25C
-25C 10
10
-25C
5 -0.01
-0.1
-1
-10
-100
5 -0.01
-0.1
-1
-10
-100
ID - Drain Current - A
ID - Drain Current - A
RDS (on) - Drain to Source On-state Resistance - m
30
RDS (on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE ID = -3.5 A VGS = -2.5 V -3.3 V -4.0 V -4.5 V
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE
50
ID = -3.5 A
40
20
30
20
10
10
0 -50
50 100 Tch - Channel Temperature -C
0
150
0
-2
-4
-6
-8
-10
-12
VGS - Gate to Source Voltage - V
4
Data Sheet D13805EJ3V0DS
PA1815
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000
SWITCHING CHARACTERISTICS 1000
td(on), tr, td(off), tf - Switchig Time - ns
Ciss, Coss, Crss - Capacitance - pF
f = 1 MHz VGS = 0 V Ciss
td(off) 100 td(on)
tr tf
1000 Coss Crss 100
10 VDD = -10 V VGS(on) = -4.0 V RG = 10 -1 ID - Drain Current - A -10
10 -1
-10 VDS - Drain to Source Voltage - V
-100
1 -0.1
SOURCE TO DRAIN DIODE FORWARD VOLTAGE 100
DYNAMIC INPUT CHARACTERISTICS
IF - Source to Drain Current - A
VGS - Gate to Source Voltage - V
-10 -8 -6 -4 -2
ID = -7 A
10
1
VDD = -16 V -10 V
0.1
0.01 0.4
0.6
0.8
1.0
1.2
0
VF(S-D) - Source to Drain Voltage - V
0
5
10
15
20
25
30
Qg - Gate Charge - nC
5
1000
rth(ch-A) - Transient Thermal Resistance - C/W
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH
Mounted on ceramic substrate of 50 cm2 x 1.1 mm Single Pulse
100
62.5C/W
10
1
0.1 0.001
0.01
0.1
1 PW - Pulse Width - s
10
100
1000
Data Sheet D13805EJ3V0DS
5
PA1815
[MEMO]
6
Data Sheet D13805EJ3V0DS
PA1815
[MEMO]
Data Sheet D13805EJ3V0DS
7
PA1815
* The information in this document is current as of May, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of UPA1815GR-9JG-E1

	To Download UPA1815GR-9JG-E1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .